600 TON PACIFIC MODEL #600-14 HYDRAULIC PRESS BRAKE

600 TON PACIFIC MODEL #600-14 HYDRAULIC PRESS BRAKE

Manufacturer: Pacific

Year: 1965

5/8" X 12'' Bending Capacity

14' Overall Die Surface

22" Open Height

10"Closed Height

12' Distance Between Housings

14" Throat Depth

12" Stroke

93, 44, 17 IPM Advance Speed

89, 36 IPM Return Speed

Main Cylinder: 20" Bore X 12" Stroke, Ram: 4" X 80" X 168", Bed: 4" X 70" x 172"

Fixed Lower Platen: 6" X 10" x 168" W/5/8" Key W/5 1/2" High Front and Rear Faces

Bed Height Above Floor: 42 1/2"

Depth Below Floor: 32"

Complete With High Speed / Normal Press Speed Adjustable Position Cam, 3-Position Advance (Dependent Upon Cam Position): Rapid / Normal, Normal / Normal, Fast Press (Reduced Tonnage) / Normal Press, 2-Position Return (Dependent Upon Cam Position): Fast Return / Fast Return, Slow Return / Fast Return, Micrometer Adjustment For Bottom Of Stroke Stop Position, Hardened Ram Inserts, C-1050 Steel, Tonnage Indicators, Lower 4-Way Die Holder, American-Style Clamping, Section-Type Ram Clamps, Manual), Dual Palm-Buttons With E-Stop, Updated Ram Stop Positioning, Updated Tonnage Control. MOTOR DATA: 50 HP Double Ended Motor With (2) Vickers Pumps, 220/440/60/3, 1800 RPM, Setup For 480 Volts.

Over All Dimensions: 7' F-B

Weight: 73,000 Lbs.

Good Condition, Upgraded By Pacific In 2013, Rebuilt The Pumps, Calibrated The Leveling System And Upgraded With A Solenoid Valve And Ran Less Than 20 Hours A Week.